Product Reviews

SmallRig Super Clamp Review: A Flexible Mount for Small Camera Rigs

A compact clamp for creators who need to attach compatible camera accessories to suitably sized bars, shelves, or other firm surfaces.

This article contains affiliate links. We may earn a commission if you buy through them, at no extra cost to you.

The SmallRig Super Clamp is a compact mounting point for cameras and accessories when a tripod or dedicated stand is inconvenient.

This SmallRig Super Clamp review looks at its adjustable jaw, threaded attachment points, and the practical limits to check before building it into a rig.

SmallRig Clamp Review Summary

The quick verdict

SmallRig Super Clamp
4.7/5

2,000+ ratings

Read Amazon Reviews

SmallRig Super Clamp

A compact clamp for creators who need to attach compatible camera accessories to suitably sized bars, shelves, or other firm surfaces.

  • Adjustable jaw opens to about 40 mm and closes to a minimum of 15 mm.
  • Includes 1/4-inch threaded holes and a 3/8-inch threaded hole for compatible accessories.
  • Made from aluminum alloy and stainless steel.
  • Rubber pads on the clamp parts are designed to help limit slipping and scratching.

Pros

  • A broad 15–40 mm jaw range makes it useful across a variety of appropriately sized supports.
  • Both 1/4-inch and 3/8-inch threaded attachment points add flexibility for compatible rig accessories.

Consider before buying

  • The 40 mm maximum jaw opening rules out thicker supports, while surfaces narrower than 15 mm are also outside the stated range.
  • It is a clamp rather than a complete articulated mounting kit, so check whether your accessory needs a separate ball head or arm.
Read the full review summary

This clamp combines a jaw that opens from 15 mm to about 40 mm with 1/4-inch and 3/8-inch threaded holes for attaching compatible accessories.

Aluminum alloy and stainless steel construction, plus rubber pads at the clamping surfaces, make it a straightforward option for adding a mounting point to a suitable bar, shelf, or similar support.

It is best suited to photographers and video creators who want a compact clamp and already know what surface and accessory they plan to connect.

The product data gives a maximum weight recommendation of 3.3 pounds, so buyers should account for the complete mounted setup and how it will be positioned before relying on that limit.

The buying factors

SmallRig Clamp Scorecard

Editorial scores reflect listed features and buyer fit; they are not laboratory measurements or customer ratings.

8/10

Mounting flexibility

The clamp is intended for varied support surfaces and has both 1/4-inch and 3/8-inch threaded holes.

7/10

Jaw range

Its 15–40 mm opening covers a useful range of suitably sized supports, though it will not fit every bar or edge.

8/10

Accessory compatibility

Two thread sizes support a range of compatible add-ons, including ball heads and magic arms.

7/10

Build materials

Aluminum alloy and stainless steel provide a metal construction for a compact mounting accessory.

7/10

Surface protection

Rubber pads are designed to help reduce slipping and scratching where the clamp contacts a surface.

6/10

Payload guidance

The supplied maximum recommendation is 3.3 pounds; buyers need to assess the full rig and mounting conditions.

Key Features and Specifications of SmallRig Clamp

  • Adjustable jaw opens to about 40 mm and closes to a minimum of 15 mm.
  • Includes 1/4-inch threaded holes and a 3/8-inch threaded hole for compatible accessories.
  • Made from aluminum alloy and stainless steel.
  • Rubber pads on the clamp parts are designed to help limit slipping and scratching.
  • Intended for mounting to varied supports such as hooks, shelves, plate glass, and cross bars, provided the surface fits the jaw.
  • The package includes one super clamp; the stated maximum weight recommendation is 3.3 pounds.

Pros and Cons of SmallRig Clamp

Pros

  • A broad 15–40 mm jaw range makes it useful across a variety of appropriately sized supports.
  • Both 1/4-inch and 3/8-inch threaded attachment points add flexibility for compatible rig accessories.
  • Rubber contact pads are intended to protect surfaces and improve grip.
  • Compact, metal construction suits a small, adaptable camera-rig mounting point.

Consider before buying

  • The 40 mm maximum jaw opening rules out thicker supports, while surfaces narrower than 15 mm are also outside the stated range.
  • It is a clamp rather than a complete articulated mounting kit, so check whether your accessory needs a separate ball head or arm.
  • The 3.3-pound maximum recommendation calls for care when considering heavier or extended setups; the full rig and mounting position matter.

Who Should Buy SmallRig Clamp?

Good fit

Consider the SmallRig Super Clamp if you need to attach a compatible camera accessory to a fixed support that measures between 15 mm and about 40 mm thick.

The two thread sizes can make it easier to work with existing rig components, and the padded jaws suit setups where contact with the mounting surface matters.

Before buying, measure the intended support at the exact clamping point and confirm that your accessory connects to one of the available threaded holes.

Include the weight of the accessory and any attached arm or adapter when checking the stated maximum recommendation.

Who should skip it

Look elsewhere if your mounting surface falls outside the jaw range or if your setup requires an included articulated arm, a different attachment standard, or support beyond the stated 3.3-pound recommendation.

How the SmallRig Clamp Fits a Camera Rig

Measure the support first

The jaw range is the key compatibility check: it opens to about 40 mm and has a 15 mm minimum.

Measure the actual bar, edge, or other support where you intend to mount it, since a clamp that cannot seat properly will not serve as a useful mounting point.

Plan the accessory connection

The 1/4-inch and 3/8-inch threaded holes let the clamp accept compatible rig accessories.

If you need to reposition a camera, light, or monitor away from the support, check whether your current setup already includes the required arm or ball head; the package contains the clamp alone.

Treat the load recommendation as a planning limit

The stated maximum weight recommendation is 3.3 pounds. Consider the total load, including adapters and anything attached beyond the clamp, and account for the leverage created by an extended accessory before choosing a placement.

Consider the contact surfaces

Rubber pads are designed to help prevent slipping and scratching at the clamp points.

They may be useful on surfaces you want to protect, but fit and secure placement still depend on the shape and condition of the support you choose.

Alternatives to SmallRig Clamp

Camera Mounts & Clamps alternative

SmallRig 9.8-Inch Magic Arm Clamp Kit
4.6/5

3,000+ ratings

Read Amazon Reviews

SmallRig 9.8-Inch Magic Arm Clamp Kit

Choose the main clamp if you want a compact standalone mount and your support fits its 15–40 mm jaw range. Choose this kit if you need an included articulating arm and a wider maximum jaw opening.

  • This kit includes a clamp with a jaw opening up to 54 mm and a 9.8-inch articulating arm with 1/4-inch screws at both ends.
  • The SmallRig Super Clamp is a standalone clamp with 1/4-inch and 3/8-inch threaded holes; an arm is not included.

Camera Mounts & Clamps alternative

SmallRig Double Ball Head Super Clamp Mount
4.6/5

8,000+ ratings

Read Amazon Reviews

SmallRig Double Ball Head Super Clamp Mount

The main clamp is a simpler fit when you already have the accessory connection you need. Consider the double ball head model if its included positioning hardware and action camera adapter better match your planned setup.

  • This model combines a clamp with a double ball head, includes an action camera mount adapter, and has a stated maximum support of 1.5 kg.
  • The SmallRig Super Clamp offers threaded holes for adding compatible accessories, with the clamp itself supplied on its own.

Is SmallRig Clamp Worth It?

The SmallRig Super Clamp is worth considering for a compact camera-rig mounting point when your support fits the 15–40 mm jaw range and your accessory uses a compatible 1/4-inch or 3/8-inch connection.

Its metal construction and padded contact points make it a flexible option for adding a clamp to an existing setup.

Check the intended surface, accessory connection, and complete rig weight before choosing it.

Because the package is a standalone clamp with a stated maximum weight recommendation of 3.3 pounds, buyers who need an arm or different mounting hardware should select a kit that includes those pieces.

Your review at a glance

SmallRig Super Clamp
4.7/5

2,000+ ratings

Read Amazon Reviews

SmallRig Super Clamp

A compact clamp for creators who need to attach compatible camera accessories to suitably sized bars, shelves, or other firm surfaces.

  • Adjustable jaw opens to about 40 mm and closes to a minimum of 15 mm.
  • Includes 1/4-inch threaded holes and a 3/8-inch threaded hole for compatible accessories.
  • Made from aluminum alloy and stainless steel.
  • Rubber pads on the clamp parts are designed to help limit slipping and scratching.

Written by

beninembassyus.org Editorial Team

Editorial team

beninembassyus.org publishes practical how-to guides and educational articles with clear steps and useful context.

Amazon customer reviews

See what buyers think

Explore customer reviews, photos and available video reviews on Amazon.

SmallRig Super Clamp

SmallRig Super Clamp

A compact clamp for creators who need to attach compatible camera accessories to suitably sized bars, shelves, or other firm surfaces.

  • Adjustable jaw opens to about 40 mm and closes to a minimum of 15 mm.
  • Includes 1/4-inch threaded holes and a 3/8-inch threaded hole for compatible accessories.
Check Video Reviews on Amazon