Product Reviews

SmallRig Field Monitor Mount Holder Review

A compact adjustable mount for camera operators who want to position a 5- or 7-inch monitor on a cage or handle.

This article contains affiliate links. We may earn a commission if you buy through them, at no extra cost to you.

The SmallRig Field Monitor Mount Holder review centers on a compact cold shoe mount for positioning 5- and 7-inch camera monitors on a cage or handle.

Its broad tilt and swivel adjustment and quick thumb-operated tilt tension suit rigs where monitor angle needs to change during setup.

SmallRig Monitor Mount Review Summary

The quick verdict

SmallRig Field Monitor Mount Holder
4.7/5

2,000+ ratings

Read Amazon Reviews

SmallRig Field Monitor Mount Holder

A compact adjustable mount for camera operators who want to position a 5- or 7-inch monitor on a cage or handle.

  • Designed to support 5- and 7-inch camera monitors through a cold shoe connection on top of a camera cage or handle.
  • Tilts through 180 degrees and swivels through 360 degrees for monitor positioning.
  • Tilt tension adjusts with a thumbscrew; swivel tension adjusts with the provided Allen wrench.
  • Built-in locating pins and a silicone pad are designed to help secure compatible monitors and prevent surface scratches or twisting.

Pros

  • Wide tilt and swivel range makes it easier to set a viewing angle around a camera rig.
  • Thumb-operated tilt tension makes routine angle changes straightforward.

Consider before buying

  • The load limit changes with tilt angle, so buyers need to check the capacity for their actual setup.
  • Swivel tension adjustment requires the included Allen wrench rather than the tilt thumbscrew.
Read the full review summary

This mount combines a cold shoe base, a top 1/4-inch screw, and an additional 1/4-inch threaded hole at the bottom.

That gives it a direct place on a compatible shoe while leaving another connection option for a magic arm or stabilizer.

The locating pins and silicone pad are intended to help secure compatible monitors and limit scratching or twisting.

Its strongest appeal is angle control in a small, 76-gram package: tilt spans 180 degrees and swivel spans 360 degrees, with tilt tension adjusted by a thumbscrew.

The main compromise is that support capacity varies with tilt angle, and the supplied guidance calls for retightening the top knurled screw with the Allen wrench.

Buyers should match their monitor and chosen angle to the stated limits before mounting.

The buying factors

SmallRig Monitor Mount Scorecard

Editorial scores reflect listed features and buyer fit; they are not laboratory measurements or customer ratings.

9/10

Angle adjustment

The 180-degree tilt and 360-degree swivel provide wide positioning flexibility.

8/10

Setup convenience

Tilt tension adjusts with a thumbscrew, though swivel tension uses the included Allen wrench.

8/10

Mounting flexibility

A cold shoe base and bottom 1/4-inch threaded hole provide two mounting routes.

8/10

Monitor retention features

Locating pins and a silicone pad are useful design details for compatible monitors.

7/10

Load guidance

The angle-specific capacity figures help with planning, but require checking the selected tilt position.

9/10

Portability

At 76 grams with a stated folded size of 78 × 67 × 42 mm, it is compact for a camera rig.

Key Features and Specifications of SmallRig Monitor Mount

  • Designed to support 5- and 7-inch camera monitors through a cold shoe connection on top of a camera cage or handle.
  • Tilts through 180 degrees and swivels through 360 degrees for monitor positioning.
  • Tilt tension adjusts with a thumbscrew; swivel tension adjusts with the provided Allen wrench.
  • Built-in locating pins and a silicone pad are designed to help secure compatible monitors and prevent surface scratches or twisting.
  • The bottom has a cold shoe adapter and a 1/4-inch threaded hole; the top has a 1/4-inch screw for a monitor or other accessory.
  • Listed load capacities vary by tilt angle: under 9.3 lb at 90 degrees, under 5.5 lb at 45 degrees, and under 5 lb at 30 degrees.
  • Weighs 76 g and folds to 78 × 67 × 42 mm.

Pros and Cons of SmallRig Monitor Mount

Pros

  • Wide tilt and swivel range makes it easier to set a viewing angle around a camera rig.
  • Thumb-operated tilt tension makes routine angle changes straightforward.
  • Cold shoe and threaded mounting options support different rig layouts.
  • Locating pins and a silicone pad add monitor-retention and surface-protection details.
  • Compact, lightweight construction takes little space in a camera kit.

Consider before buying

  • The load limit changes with tilt angle, so buyers need to check the capacity for their actual setup.
  • Swivel tension adjustment requires the included Allen wrench rather than the tilt thumbscrew.
  • The top knurled screw needs an Allen-wrench retightening step for added security.

Who Should Buy SmallRig Monitor Mount?

Good fit

Consider it if your setup uses a 5- or 7-inch monitor and has a compatible cold shoe on a cage or handle.

The range of movement is useful when you need to reposition a display for different framing or camera orientations, and the tilt thumbscrew allows adjustments without reaching for a tool.

Before mounting, compare your monitor’s weight and the angle you plan to use with the listed capacity limits.

Check that the top 1/4-inch screw and locating-pin arrangement suit your monitor, then retighten the knurled screw with the Allen wrench as directed.

Its small footprint is a practical fit for a rig where a larger articulating arm would take up more space.

Who should skip it

Look elsewhere if your setup does not provide a compatible cold shoe or 1/4-inch threaded mounting point, or if the monitor and angle combination exceeds the applicable listed load capacity.

It may also be a poor fit if you want both tilt and swivel tension to adjust tool-free; the swivel tension uses the supplied Allen wrench.

How the SmallRig Monitor Mount Fits a Camera Rig

Angle control for on-camera viewing

A 180-degree tilt range and 360-degree swivel make it possible to direct the monitor around the mounting point.

This is helpful when camera position or operator stance changes, while the tilt thumbscrew offers a direct way to adjust resistance.

Swivel tension has a separate adjustment method, so keep the provided Allen wrench accessible when changing that setting.

Mounting options and monitor contact

The cold shoe adapter at the bottom supports direct placement on a compatible cage or handle, and the bottom 1/4-inch thread offers another connection path. At the top, the 1/4-inch screw mounts a monitor or another listed accessory.

Locating pins and a silicone pad are intended to reduce movement and scratching, but buyers should still confirm that the arrangement matches their monitor.

Capacity depends on tilt position

The listed limits are angle-specific: under 9.3 lb at 90 degrees, under 5.5 lb at 45 degrees, and under 5 lb at 30 degrees.

That variation makes it important to consider both the monitor weight and the position where it will be held, rather than treating one capacity figure as universal.

Retightening the knurled screw with the Allen wrench is part of the stated setup guidance.

A compact addition to a rig

At 76 g and a folded size of 78 × 67 × 42 mm, the holder is suited to a compact camera build or a kit where storage space matters.

Its design focuses on positioning a monitor close to a cage or handle. Buyers who need the monitor positioned farther away should first decide whether that mounting geometry works for their shooting setup.

Alternatives to SmallRig Monitor Mount

Camera Mounts & Clamps alternative

SmallRig Camera Monitor Mount 6313
4.7/5

800+ ratings

Read Amazon Reviews

SmallRig Camera Monitor Mount 6313

Compare the two if you want a similar compact monitor mount with cold shoe and threaded connections.

The 6313 may suit a setup that specifically needs portrait as well as landscape installation; choose based on the mounting details that fit your monitor and rig.

  • The 6313 has a retractable 1/4-inch locating screw, a cold shoe base, a bottom 1/4-inch threaded hole, and supports horizontal or vertical monitor installation.
  • It offers 180-degree tilt and 360-degree pan with thumb-adjustable tilt damping.
  • The Field Monitor Mount Holder supports 5- and 7-inch monitors, with a cold shoe base, bottom 1/4-inch thread, locating pins, and angle-dependent capacity guidance.

Camera Mounts & Clamps alternative

SmallRig 5.5-Inch Articulating Magic Arm
4.7/5

1,000+ ratings

Read Amazon Reviews

SmallRig 5.5-Inch Articulating Magic Arm

Choose the Field Monitor Mount Holder when a cold shoe base and the stated monitor-oriented retention features match your rig.

Consider the articulating arm if a short arm with 1/4-inch threaded connections at both ends better suits the mounting points and spacing you need.

  • This 5.5-inch articulating arm has 1/4-inch screws at both ends, dual 360-degree ball heads, and a rubber cushion at the monitor screw.
  • Its listed best weight load is 1.5 kg.
  • The Field Monitor Mount Holder attaches through a cold shoe or bottom 1/4-inch thread and is designed for 5- and 7-inch monitors.

Is SmallRig Monitor Mount Worth It?

The SmallRig Field Monitor Mount Holder is worth considering for a compact camera rig that needs a 5- or 7-inch monitor positioned through a cold shoe or 1/4-inch connection.

Its broad angle range, tilt thumbscrew, and monitor-contact features make it a practical option for adjustable on-camera viewing.

Check your monitor’s weight against the capacity for your chosen tilt angle, confirm the mounting interface, and plan to use the included Allen wrench for swivel adjustment and screw retightening.

If those details fit your setup, this holder offers a small, flexible way to position a field monitor.

Your review at a glance

SmallRig Field Monitor Mount Holder
4.7/5

2,000+ ratings

Read Amazon Reviews

SmallRig Field Monitor Mount Holder

A compact adjustable mount for camera operators who want to position a 5- or 7-inch monitor on a cage or handle.

  • Designed to support 5- and 7-inch camera monitors through a cold shoe connection on top of a camera cage or handle.
  • Tilts through 180 degrees and swivels through 360 degrees for monitor positioning.
  • Tilt tension adjusts with a thumbscrew; swivel tension adjusts with the provided Allen wrench.
  • Built-in locating pins and a silicone pad are designed to help secure compatible monitors and prevent surface scratches or twisting.

Written by

beninembassyus.org Editorial Team

Editorial team

beninembassyus.org publishes practical how-to guides and educational articles with clear steps and useful context.

Amazon customer reviews

See what buyers think

Explore customer reviews, photos and available video reviews on Amazon.

SmallRig Field Monitor Mount Holder

SmallRig Field Monitor Mount Holder

A compact adjustable mount for camera operators who want to position a 5- or 7-inch monitor on a cage or handle.

  • Designed to support 5- and 7-inch camera monitors through a cold shoe connection on top of a camera cage or handle.
  • Tilts through 180 degrees and swivels through 360 degrees for monitor positioning.
Check Video Reviews on Amazon