This SmallRig Cold Shoe Mount review looks at a compact two-piece set for adding an accessory shoe to a compatible camera cage, plate, or handle.
Its appeal is straightforward: secure a microphone, flash, or LED using a threaded attachment, with the key choice being whether you need a fixed mount rather than adjustable positioning.
SmallRig Cold Shoe Mount Review Summary
The quick verdict

3,000+ ratings
Read Amazon ReviewsSmallRig Cold Shoe Mount 2060
A practical option for camera cage users who want two fixed cold shoe positions for a microphone, flash, or LED accessory.
- Two cold shoe mounts are included, each measuring approximately 25 × 25 mm.
- Aluminum alloy construction keeps the mount body compact.
- A 1/4-inch-20 threaded connection supports attachment to compatible cages, plates, handles, and other camera accessories.
- Four M2.5 screws, two 1/4-inch-20 screws, and two hex spanners are included.
Pros
- Two mounting points come in one compact kit.
- Compatible threaded holes allow use on a variety of rig accessories.
Consider before buying
- It does not provide the tilt or angle adjustment available from ball-head mounts.
- Buyers must confirm their cage’s threaded-hole arrangement and choose the correct supplied fastener.
Read the full review summary
SmallRig’s 2060 set provides two aluminum alloy cold shoe mounts, each measuring about 25 × 25 mm.
Each can be attached to compatible gear through a 1/4-inch-20 threaded connection; the package also includes M2.5 screws, 1/4-inch-20 screws, and hex spanners.
That gives buyers a small mounting kit for building out a camera rig without adding a large articulated arm.
The design suits photographers and video creators who already use cages, plates, or handles with compatible threaded holes and want a simple place for a shoe-mounted accessory.
The arrows help indicate orientation, while bent bevels at one end are intended to help prevent accidental removal.
Check the mounting instructions for your particular cage: the product notes a special screw requirement for SmallRig Full Cage 1661 and says the mount is not suitable for DJI or ZHIYUN gimbals.
The buying factors
SmallRig Cold Shoe Mount Scorecard
Editorial scores reflect listed features and buyer fit; they are not laboratory measurements or customer ratings.
Mounting versatility
The 1/4-inch-20 connection and included M2.5 screws support several compatible rig configurations.
Accessory usefulness
A cold shoe provides a straightforward place for a microphone, flash, or LED on camera accessories.
Setup clarity
Orientation arrows and included hex spanners help communicate installation, though the correct fastener depends on the rig.
Kit value
Two mounts and multiple fasteners make the set useful for adding more than one mounting point.
Positioning flexibility
This is a fixed shoe mount; the description does not indicate tilt or angle adjustment.
Rig compatibility confidence
The threaded mounting approach is broad, but buyers need to check their equipment and heed the stated gimbal exclusions.
Key Features and Specifications of SmallRig Cold Shoe Mount
- Two cold shoe mounts are included, each measuring approximately 25 × 25 mm.
- Aluminum alloy construction keeps the mount body compact.
- A 1/4-inch-20 threaded connection supports attachment to compatible cages, plates, handles, and other camera accessories.
- Four M2.5 screws, two 1/4-inch-20 screws, and two hex spanners are included.
- The shoe is designed to hold a microphone, flash, or LED accessory.
- Two white arrows indicate mounting orientation, and bent bevels at one end are designed to help prevent accidental removal.
Pros and Cons of SmallRig Cold Shoe Mount
Pros
- Two mounting points come in one compact kit.
- Compatible threaded holes allow use on a variety of rig accessories.
- Includes screws and hex spanners for installation.
- Simple fixed-shoe design avoids the bulk of an adjustable arm.
Consider before buying
- It does not provide the tilt or angle adjustment available from ball-head mounts.
- Buyers must confirm their cage’s threaded-hole arrangement and choose the correct supplied fastener.
- The product is specifically marked as unsuitable for DJI and ZHIYUN gimbals.
Who Should Buy SmallRig Cold Shoe Mount?
Good fit
Consider the 2060 if your camera cage, plate, or handle has a compatible 1/4-inch-20 or M2.5 mounting point and you want to add a microphone, flash, or LED shoe.
The two-piece set is especially practical when you are planning multiple accessory positions or want a spare mount available for another part of your rig.
Before ordering, check the mounting point and screw instructions for your exact cage.
The product notes that most cages use the included 1/4-inch-20 screw, while SmallRig Full Cage 1661 requires a different approach using the cage’s M2.5 threaded mounting. Also confirm that your setup is not a DJI or ZHIYUN gimbal.
Who should skip it
Skip this set if you need to tilt or reposition an accessory after installation; a fixed cold shoe does not provide articulated positioning. Choose a compatible adjustable mount instead.
Look elsewhere if your rig is a DJI or ZHIYUN gimbal, or if you cannot confirm a compatible threaded mounting point on the accessory where you plan to install it.
How the SmallRig Cold Shoe Mount Fits a Camera Rig
A fixed shoe for a cleaner rig
The 2060 turns a compatible threaded point on a cage, plate, or handle into a place to attach a shoe-mounted accessory.
Because it is a small fixed mount rather than an arm, it can be a tidy choice when the accessory’s position is already suitable and does not need frequent adjustment.
Fasteners and fit deserve a quick check
The package includes both 1/4-inch-20 and M2.5 hardware, but the appropriate connection depends on the equipment.
Check the cage’s threaded holes and follow the product’s specific note for SmallRig Full Cage 1661 before installing; the supplied arrows also help orient the mount.
Two mounts support more than one accessory
The two-piece pack can help build out separate accessory positions across compatible rig components.
A shoe can accommodate a microphone, flash, or LED, so the kit is useful when those accessories need a mounting point; the description does not establish a load rating, so check the accessory and rig requirements for your setup.
Know the stated compatibility limit
The product is explicitly unsuitable for DJI and ZHIYUN gimbals.
Since its intended attachment is through threaded holes on camera accessories, buyers should verify both the mounting interface and the intended installation point before adding it to a rig.
Alternatives to SmallRig Cold Shoe Mount
Camera Flash Shoe Mounts alternative

1,000+ ratings
Read Amazon ReviewsSmallRig Double Ball Head Adapter 1135
Choose the 2060 when you want two simple fixed mounts for a compatible threaded rig. Consider the 1135 when changing an accessory’s angle is more important and its single articulated mount suits your setup.
- The 1135 uses a double ball head with a cold shoe and 1/4-inch screw at both ends, and its head can rotate 180 degrees and lock with a side wingnut.
- Its recommended maximum load for a monitor or LED light is 1 kg.
- The 2060 provides two compact fixed cold shoe mounts, without an angle-adjustment mechanism.
Camera Flash Shoe Mounts alternative

700+ ratings
Read Amazon ReviewsSmallRig Mini Ball Head Cold Shoe Mount 3577
The 2060 is the more relevant fit when you need two threaded fixed mounts.
The 3577 is a more suitable option when you need one lightweight mount with tilt adjustment and your accessory is within its stated 250 g limit.
- The 3577 is a single mini ball-head mount that tilts up to 138 degrees and supports devices up to 250 g.
- It weighs 20 g and uses a cold shoe base for attachment to a camera or cage.
- The 2060 is a two-piece fixed-mount kit, with no stated tilt adjustment or weight limit.
Is SmallRig Cold Shoe Mount Worth It?
The SmallRig Cold Shoe Mount 2060 is worth considering if you need two compact, fixed accessory shoes for a compatible camera cage, plate, or handle.
Its included fasteners and small aluminum alloy mounts make the kit useful for adding a microphone, flash, or LED position without a larger articulated support.
Check your rig’s mounting holes and the stated gimbal exclusion before buying.
If you need to change an accessory’s angle, a ball-head style mount will better match that requirement; if a fixed position works, the 2060 offers a practical two-mount solution.
Your review at a glance

3,000+ ratings
Read Amazon ReviewsSmallRig Cold Shoe Mount 2060
A practical option for camera cage users who want two fixed cold shoe positions for a microphone, flash, or LED accessory.
- Two cold shoe mounts are included, each measuring approximately 25 × 25 mm.
- Aluminum alloy construction keeps the mount body compact.
- A 1/4-inch-20 threaded connection supports attachment to compatible cages, plates, handles, and other camera accessories.
- Four M2.5 screws, two 1/4-inch-20 screws, and two hex spanners are included.